TK5410

ENDURA LOW PROFILE SINGLE UNIT CHARGER FOR KENWOOD NX200 / NX5200 / TK2180

Part Number: EC-KSC32

Also Charges: NX200S, NX210, NX210G, NX300, NX300S, NX410, NX411, NX5300, NX5400, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430, VP8000. For use with NiCd, NiMH, Li-Ion, and LiPo batteries. Compatible with KNB-41NC / KNB-50NC (IS batteries). Not compatible with KNB-73LCM / KNB-72LC (IS batteries).

ENDURA TWELVE-UNIT CHARGER WITH EXTERNAL POWER SUPPLY

Part Number: EC12M

Includes 6 dual charging pods and power supply with cord for U.S. type wall outlet. Select specific pod(s) and quantity each. See special instructions for ordering EC12M on product detail page. Rapid charges NiCd, NiMH, Li-Ion, or LiPo batteries based on pod selected. Certified to meet California Energy Commission (CEC-400-2011-005) and DoE (10 CFR, Part 430) requirements for energy conversation. Provides cold and hot battery monitoring for batteries with temperature sensing circuitry.

ENDURA DUAL UNIT CHARGER FOR KENWOOD NX200 / NX5200 / TK2180

Part Number: EC2M-KW4A-D

Also Charges: NX200S, NX205G, NX210, NX210G, NX300, NX300S, NX305G, NX410, NX411, NX5300, NX5400, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430, VP8000. For use with NiCd, NiMH, Li-Ion, and LiPo batteries. Charger accommodates Kenwood KNB-L3 battery with all applicable radios. Compatible with KNB-41NC / KNB-73LCM / KNB-50NC (IS batteries). Not compatible with KNB-72LC / KNB-LS5 / KNB-LS7 (IS battery). Accessories available for in-vehicle installation.

ENDURA RUGGED IN-VEHICLE CHARGER FOR KENWOOD NX200, NX5000, VP6000

Part Number: EVC-KW4

Compatible with: Kenwood NX200, NX200S, NX205G, NX210, NX210G, NX300, NX300S, NX305G, NX410, NX411, NX5000, NX5200, NX5300, NX5400, TK2180, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6000, VP6230, VP6330, VP6430, VP8000

• Includes DC power cable, tie-down strap, and USB port for charging mobile phone or tablet. For use with Li-Ion / LiPo and NiMH batteries
• Compatible with KNB-LS5, KNB-LS7, KNB-41NC, KNB-72LC, KNB-73LCM / KNB-50NC (IS batteries)
• Radio holder provides a precision fit with the radio and battery
• Status LED confirms charging in progress, charging 80% complete, and battery fully charged
• Includes fasteners for mounting
• Charges battery with or without radio
• Available EVC-KW4-4 provides a rugged 4-unit charging solution
• Dimensions (W x H x D): 2.75" x 5.3" x 3.06" (69.9 x 133.9 x 77.7 mm)
• Weight: 0.630 lbs (285.8 g)
• 3-year extended warranty for materials & workmanship

ENDURA CHARGER POD FOR KENWOOD NX200, NX5200, TK2180

Part Number: TWP-KW4A

Compatible with: Kenwood NX200, NX200S, NX205G, NX210, NX210G, NX300, NX300S, NX305G, NX410, NX411, NX5200, NX5300, NX5400, TK2180, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5000, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430, VP8000

• For use with NiCd, NiMH, Li-Ion, and LiPo batteries; pod accommodates Kenwood KNB-L3 battery with all applicable radios
• Compatible with KNB-41NC / KNB-50NC / KNB-73LCM (IS batteries)
• Not compatible with KNB-72LC / KNB-LS5 / KNB-LS7 (IS batteries). Does not fit KNB-L11 battery.
• Pod installs easily and fits Endura EC1, EC1M, and EC6M chargers.
• Marked "TK2180/3180/5210" for easy pod identification

IN-VEHICLE MOUNTING BRACKET FOR ENDURA EC1M

Part Number: EC1M-MBHD

Compatible with: Endura EC1M, EC1M-V2, EC1MV3

• Designed for mounting charger to vertical or horizontal surface or attaching to an optional bracket with 4-hole AMPS pattern
• Includes integrated tie-down strap and fasteners for attaching EC1M-MBHD to vehicle
• 2-year extended warranty for materials, & workmanship

MOUNTING BRACKET FOR ENDURA EC6M, EC12M CHARGERS

Part Number: EC6M-MB

Compatible with: Endura EC6M, EC6MV2, EC12M

• Designed for mounting charger to a vertical or horizontal surface in an office, shop, or vehicle
• Includes integrated tie-down straps, fasteners for attaching EC6M-MB to a wall or floor, and straddle bracket to secure charger to bracket
• Dimensions (WxDxH): 20.2" x 6.6" x 3.9" (513.1 x 167.6 x 99.1 mm)
• 2-year extended warranty for materials & workmanship

POWER SUPPLY WITH 3.5 mm DIAMETER CABLE FOR EDURA EC1 CHARGER

Part Number: TWC1-PS1

Compatible with: Endura EC1-V2, RELM KAA0300P

• Input: 100-240V AC, 50-60 Hz, 500 mA
• Output: 15.0V, 1000 mA
• UL listed
• 2-year extended warranty for materials & workmanship

POWER SUPPLY FOR ENDURA EC12M, EC12MV2 CHARGER

Part Number: TWC12M-PS

Compatible with: Endura EC12M, EC12MV2, EC12MV3, EC12MV4

• Input: 100 - 240V, 50 - 60 Hz, 2.2A (max)
• Output: 15.0V, 10.0A
• UL listed
• Requires AC power cord for connection to a wall outlet (sold separately)
• For U.S. type power cord, order TWC6M-PC. For UK type power cord, order TWC6M-PCU
• 2-year extended warranty for materials & workmanship

POWER SUPPLY FOR ENDURA EC2M CHARGERS

Part Number: TWC2M-PS

Compatible with: Endura EC2M

• Input: 100-240V AC, 50-60 Hz, 580 mA
• Output: 15.0V DC, 1.6A
• UL, CE, RCM certification
• Includes U.S. type plug, removable
• 2-year extended warranty for materials & workmanship

U.S. AC POWER CORD FOR ENDURA EC6M POWER SUPPLY

Part Number: TWC6M-PC

Compatible with: Endura EC6M, EC6MV2

• Cable Length 5.0' (1.5 m)
• Connects the TWC6M-PS power supply to a standard U.S. AC wall outlet (120V AC)
• 2-year extended warranty for materials & workmanship

VEHICLE POWER ADAPTER FOR ENDURA EC1M, EC2M, EC6M CHARGER

Part Number: TWC6M-VPA

Compatible with: Endura EC1M, EC1M-V2, EC1MV3, EC2M, EC2MV2, EC2MV3, EC2MV4, EC6M, and EC6MV2

• Supplies power to the charger from a vehicle’s 12V or 24V outlet
• Features a power-status LED, heavy-duty coiled cord, and user-replaceable 6.3 × 32 mm fast-acting fuse (7A, 250V)
• Weight: 0.254 lb (115.37 g)
• 3-year extended warranty for materials & workmanship